Skip to content
English
  • There are no suggestions because the search field is empty.

How can I manage the container return and inspection process in ConnectSx?

Last Updated: June 2024

Typically when containers or trays come back from the field they must be inspected and this is a process that often is tracked by the device Manufacturer’s Quality system. ConnectSx has functionality to facilitate this workflow.

To use it follow these steps:

  1. First, log into the Console and navigate to the inventory screen.

  2. If you haven’t already, accept the transfer of the container back to the organization.

  3. Next, Locate the container that needs to be checked in and click on it to enter its detail screen.

  4. Scroll down to the “Check in History” section.

  5. Click “Begin Checkin”.

     

    4e73d760-22f8-4be7-83cf-a60cc8665c0d

  6. Next, inspect the container and fill in the statuses in the dropdown menus that appear:

    1. Cleanliness Check (Pass, Fail)

    2. Visual Inspection (Pass, Fail)

    3. Reconciled to BOM (Pass, Fail)

    4. IFU Attached (Yes, No)

  7. Set the flag of the container checkin to be Green, Yellow, or Red depending on the status of the container and how much work is required for it to be ready to be in circulation again.

  8. When the set check in is done, as long as there isn’t a Red Flag, click “complete” to log the checkin in the checkin history.

 

Note: You may click save at any point to save your progress. The checkin is not logged until the “complete” button is pressed.

Containers marked with the Red Flag will automatically be given a Red and Inspection Hold status, indicating it must be inspected and resolved before it can be used or transferred again. If the container is marke

 

2a6df1d5-c1d0-408f-a3b7-1a40c55aed21